Digital Security Controls Ltd. 005501Z32433 User Manual

9

5-digit ESN is being enrolled, add the digit [0] to the beginning of the ESN.
(E.g., ESN=21234, enter 021234)

5. The device is now enrolled on the system. Record the serial number and the

assigned zone number in the programming worksheets in the back of this
manual.

6. Continue with steps 3 - 5 until you have enrolled all wireless devices.

7. To exit press [#].

NOTE: The devices will not work properly until you complete zone and partition
programming (see section 4).

For wireless keys to work on the system, you need to enroll them and then program
the function buttons. Wireless keys are not assigned to zones and require no zone
programming. You can enroll up to 16 wireless keys on the system.

1. At a system keypad, enter [✱][8][Installer’s code] to go to the Installer’s

Programming section.

2. Enter programming section [804].

3. Enter a 2-digit number [41]-[56] to assign the wireless key a slot. These numbers

correspond to wireless key numbers 01-16.

4. Enter the key’s ESN. The entry 

must be six digits. If an older key with a 5-digit

ESN is being enrolled, add the digit [0] to the beginning of the ESN. (E.g.
ESN=61234, enter 061234)

5. The key is now enrolled on the system. Record the serial number and the

assigned slot number in the programming worksheets in the back of this
manual.

6. Repeat steps 3 - 5 until all wireless keys have been enrolled.

7. (PC5010 and PC5015 only)

(PC5010 and PC5015 only)

(PC5010 and PC5015 only)

(PC5010 and PC5015 only)

(PC5010 and PC5015 only) By default, all wireless keys are assigned to
Partition 1. To assign keys to Partition 2, enable the appropriate options in
programming sections [91] and [92].

NOTE: A wireless key can only be assigned to one partition.

8. To exit press [#].

WLS909 wireless keys have four programmable function buttons. You must
program a set of four functions for the buttons before any keys will work. After the
functions are programmed, when you press and hold one of the four buttons for
two seconds, the system will execute the programmed function.

 program the function buttons in section [59].

All wireless keys will have the same four functions.

 all wireless keys

assigned to Partition 1 will have the four functions programmed in section [59]. All
wireless keys assigned to Partition 2 will have the four functions programmed in
section [60]. For example, if function button 1 in Section [59] is programmed for