Digital Security Controls Ltd. 00NB929 User Manual
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
■
Re-orient the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■
Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television
Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock #
004-000-00345-4.
Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Ce dispositif satisfait aux exigences d’Industrie Canada, prescrites dans le document CNR-210. son utilisation est autorisée
seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock #
004-000-00345-4.
Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Ce dispositif satisfait aux exigences d’Industrie Canada, prescrites dans le document CNR-210. son utilisation est autorisée
seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
WLS929
Wireless Key
OPERATING INSTRUCTIONS
© 2000 Digital Security Controls Ltd.
Printed in Canada 29004986 R001
Printed in Canada 29004986 R001
The WLS929 wireless key allows you to arm and
disarm your alarm system, as well as perform other
keypad functions, from a unit small enough to keep
in your pocket. Together with your installer, you
can decide which functions you wish to have
accessible from your portable key.
disarm your alarm system, as well as perform other
keypad functions, from a unit small enough to keep
in your pocket. Together with your installer, you
can decide which functions you wish to have
accessible from your portable key.
To activate any one of the four selected functions,
press and hold the appropriate button for two
seconds. Your installer will indicate each function
by applying a circular label on the rear of the unit
or by installing pre-printed buttons.
press and hold the appropriate button for two
seconds. Your installer will indicate each function
by applying a circular label on the rear of the unit
or by installing pre-printed buttons.
Signals will not be received if the key is not within the range
of the wireless receiver.
of the wireless receiver.
The default functions are as follows:
Stay Arming
Press this button to arm your system in the Stay mode. All perimeter zones will be
armed, such as all window and door contacts, but the interior zones will remain
inactive, allowing you to stay on the premises without setting off an alarm.
armed, such as all window and door contacts, but the interior zones will remain
inactive, allowing you to stay on the premises without setting off an alarm.
Away Arming
Press this button to arm your system in the Away mode. Both the interior and exterior
zones will be armed, allowing you to exit the premises.
zones will be armed, allowing you to exit the premises.
Disarm
Press this button to disarm your system. You do not have to enter your access code
when you use the key to disarm the system.
when you use the key to disarm the system.
Panic
Press this button to notify your central monitoring station of a situation requiring the
police, such as a break-in.
police, such as a break-in.
Other available functions (to be programmed by the installer):
Fire -
notifies your central monitoring station of a fire condition.
Auxiliary -
notifies your monitoring station of a non-medical emergency.
No Entry Delay Arming -
arms the system with no entry delay on delay zones.
Chime
ON/OFF
-
turns the door chime feature ON and OFF.
System Test -
activates the Bell, Keypad LEDs and communications test for 2 seconds.
Command Outputs 1, 3, 4 -
opens garage door, turns on lights, etc.
Command Output 2 -
resets smoke detector.
Quick Exit -
allows 2 minutes to exit the premises while the system is armed, without
sounding the alarm.
Reactivate Stay/Aways -
activates the Stay/Away zones, if system is armed in Stay Mode.
Please discuss all WLS929 options with your installer in order to program the
best possible combination to suit your needs.
best possible combination to suit your needs.
Testing the WLS929 Key
When any key is pressed on the WLS929 to perform a function, its battery status is sent to
the receiver. If the batteries are low, the Trouble light on any of your system’s keypads will
turn ON. If the Trouble light turns ON, the key’s batteries must be replaced.
the receiver. If the batteries are low, the Trouble light on any of your system’s keypads will
turn ON. If the Trouble light turns ON, the key’s batteries must be replaced.
NOTE: Do not use a Fire, Auxiliary or Panic key to test your WLS929 unit as pressing
these buttons will
these buttons will
always notify your monitoring station of a non-medical emergency.
To replace the batteries, open the key’s plastic casing. To
remove the casing, take a flathead screwdriver and insert it
into the slot at the wide end of the plastic. Carefully twist the
screwdriver to separate the top and bottom casing.
remove the casing, take a flathead screwdriver and insert it
into the slot at the wide end of the plastic. Carefully twist the
screwdriver to separate the top and bottom casing.
Remove the old batteries from between the two metal clips.
Insert the new batteries according to the diagram at right
and reattach the key’s plastic casing. The WLS929 requires
three batteries of type LR44.
Insert the new batteries according to the diagram at right
and reattach the key’s plastic casing. The WLS929 requires
three batteries of type LR44.
NOTE: The polarity of the batteries must be observed.
TM
–
+
LIMITED WARRANTY
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall
be free of defect in materials and workmanship under normal use and that in fulfilment of any breach of such warranty,
Digital Security Controls Ltd. shall, at its option, repair or replace the defective equipment upon return of the equipment
to its repair depot. This warranty applies only to defects in parts and workmanship and not to damage incurred in
shipping or handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning,
excessive voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper applica-
tion of the equipment.
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall
be free of defect in materials and workmanship under normal use and that in fulfilment of any breach of such warranty,
Digital Security Controls Ltd. shall, at its option, repair or replace the defective equipment upon return of the equipment
to its repair depot. This warranty applies only to defects in parts and workmanship and not to damage incurred in
shipping or handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning,
excessive voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper applica-
tion of the equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties,
whether expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd. This
warranty contains the entire warranty. Digital Security Controls Ltd. neither assumes, nor authorizes any other person
purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability
concerning this product.
whether expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd. This
warranty contains the entire warranty. Digital Security Controls Ltd. neither assumes, nor authorizes any other person
purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability
concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or consequential damages, loss of
anticipated profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation
or operation or failure of this product.
anticipated profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation
or operation or failure of this product.
WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular
basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption,
it is possible for this product to fail to perform as expected.
basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption,
it is possible for this product to fail to perform as expected.
back
front