Digital Security Controls Ltd. 00SS5501Z32 User Manual

4

There are several programming options available
for the LCD5501Z32-900 keypad. These are
described below. Record all your programming
choices in the programming worksheets included in
this manual.

Programming the LCD5501Z32-900 is similar to
programming the rest of the system. When you are in
the LCD5501Z32-900 programming sections, the
keypad will display which options are turned on along
the top of the display. To turn an option on or off, press
the number corresponding to the option on the
number pad. The numbers of the options that are
currently turned ON will be displayed.

For example, if options 1 and 2 are on, the display
will look like:

For information on programming the rest of your
security system, please refer to your system’s
Installation Manual.

The function keys are programed in sections [1] to
[5]. By default, the 5 function keys on the keypad are
programmed as Stay Arm (03), Away Arm (04),
Chime (06), Sensor Reset (14) and Quick Exit (16).
You can change the function of each key on every
keypad. Please see your system’s 

Installation

Manual for instructions on programming the keys,
and a complete list of all the function key options
available for your system.

The LCD5501Z32-900 will display the current time
after 30 seconds of no key presses. To set the
correct time and date for the system, please refer to
your system’s 

Instruction Manual. You can change

how the keypad displays the time with the following
options. To change the clock options:

1. Enter [*][8][Installer’s code]

2. Enter [000] to go to keypad programming

3. Enter section [6] to go to clock options.

4. To turn any of the options on or off, press [1], [2], or [3]:

NOTE:  If the Time does not display on keypad option
is selected, make sure that the Keypad displays time
when zones are open option is also selected.

[1]

ON =

Time displays on keypad

OFF = Time does not display on keypad

[2]

ON =

Clock display is in AM/PM format
(e.g. 08:00 AM)

OFF = Clock display is in 24-hour format

(e.g. 20:00)

[3]

ON =

Keypad does not display time
when zones are open

OFF = Keypad displays time when zones

are open

5. When you are finished programming the clock

options, press [#] to exit.

Keypad Programming