Digital Security Controls Ltd. 01NB9010 User Manual
1 9
Section 2.2: Changing How the NT9010
Works For Users
Most NT9010 installations will only require basic programming. You can complete the basic programming using
the NT9010 Flash Programming (please see Chapter 1: Quick Set Up for more information). The NT9010 User’s
Guide provides basic directions for arming and disarming the system, bypassing zones and performing user func-
tions. The following sections provide information on how to customize the NT9010 interface for your users, and
how to change which options are available to NT9010 users.
the NT9010 Flash Programming (please see Chapter 1: Quick Set Up for more information). The NT9010 User’s
Guide provides basic directions for arming and disarming the system, bypassing zones and performing user func-
tions. The following sections provide information on how to customize the NT9010 interface for your users, and
how to change which options are available to NT9010 users.
2.2.1
Accessing
the NT9010
System Using
a Telephone
the NT9010
System Using
a Telephone
Accessing the NT9010 Using a Local Telephone
To access the NT9010 system using a premise telephone, pick up any local Touch-
To access the NT9010 system using a premise telephone, pick up any local Touch-
Tone
1
telephone and enter the three digit Telephone Access Code (default
[✱✱✱]). The NT9010 will seize the line and announce
“Hello.”
If the Access Code Required for Local Access option is enabled (section [807]-
[021] option [02]) the NT9010 will announce:
[021] option [02]) the NT9010 will announce:
“Enter your Access Code.”
Enter your four or six-digit system access code. Invalid access codes count towards
the Keypad Lockout, if enabled.
the Keypad Lockout, if enabled.
You can access the NT9010 using a local telephone, even if the telephone line is
disconnected. For this to operate properly, you must enable Telephone Line Mon-
itoring on the system (see 2.3.15 Telephone Line Monitoring (TLM) on page
53).
disconnected. For this to operate properly, you must enable Telephone Line Mon-
itoring on the system (see 2.3.15 Telephone Line Monitoring (TLM) on page
53).
You can change the Telephone Access Code to any 3 digit code using numbers 0
through 9 as well as the [✱] and [#] keys. This access code can only be changed
through Advanced Programming.
through 9 as well as the [✱] and [#] keys. This access code can only be changed
through Advanced Programming.
NOTE:
Avoid programming this code as a valid 3 digit area code or tele-
phone service. Avoid numbers such as [911], [411], [611] or [0XX]. Do not try
to exit this section by pressing [#], it will be accepted as a valid digit. To exit,
program all 3 digits of the code or press [Forward].
to exit this section by pressing [#], it will be accepted as a valid digit. To exit,
program all 3 digits of the code or press [Forward].
Telephone Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [807]-[020]
Code Required for Local Access . . . . . . . . . . . . . . . .Section [807]-[021], Option [2]
TLM Enable/Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [7]
Keypad Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Code Required for Local Access . . . . . . . . . . . . . . . .Section [807]-[021], Option [2]
TLM Enable/Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [7]
Keypad Lockout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Accessing the NT9010 Using a Remote Telephone
If the Remote Access option (section [807]-[021], option [01]) is enabled users can
access the system from any Touch-Tone* telephone in the world.
If the Remote Access option (section [807]-[021], option [01]) is enabled users can
access the system from any Touch-Tone* telephone in the world.
NOTE: Please pause for 1 second between key presses when enter-
ing access codes or commands on a remote phone.
ing access codes or commands on a remote phone.
1.
Touch-Tone is a trademark of Stentor Resource Centre Inc.