Digital Security Controls Ltd. 02WLS916NB User Manual

Most fires occur in the home, and to minimize this danger, it is rec-
ommended that a household fire safety audit be conducted and a 
family escape plan be developed.

1.

Are all electrical appliances and outlets in safe condition? 
Check for frayed cords, overloaded lighting circuits, etc. If 
you are uncertain about the condition of your electrical appli-
ances or household service, have a professional evaluation.

2.

Are all flammable liquids safely stored in closed containers, 
and in a cool and well ventilated area? Cleaning the unit with 
flammable liquids should be avoided.

3.

Are hazardous materials such as matches out of the reach of 
children?

4.

Are furnaces and wood burning appliances properly installed, 
clean, and in good working order?  If in doubt, have a profes-
sional evaluation.

There is often very little time between the detection of a fire and 
the time it becomes deadly. Because of this, it is very important 
that a family escape plan be developed and rehearsed.
1.

Every family member should participate in developing the 
escape plan.

2.

Study the possible escape routes from each location within 
the house. Since many fires occur at night, special attention 
should be given to the escape routes from sleeping quarters.

3.

It is essential that escape from a bedroom be possible without 
opening the interior door. Consider the following when mak-
ing your escape plans:

•

Ensure that doors and windows that open to the outside are 
easily opened. Ensure that they are not painted shut and that 
the locking mechanisms operate smoothly.

•

If opening the exit or using the exit is too difficult for chil-
dren, the elderly or handicapped, plans for their rescue 
should be developed. This plan includes making sure that 
those who are to perform the rescue can promptly hear the 
fire warning signal.

•

If the exit is above the ground level, an approved fire ladder 
or rope should be provided, as well as training in its use.

•

Exits on the ground level should be kept clear. Be sure to 
remove snow from exterior patio doors in the winter and that 
outdoor furniture or equipment does not block exits.

•

The family should have a predetermined assembly point 
where everyone can be accounted for; for example, across 
the street or at a neighbor’s house.

•

Once everyone is out of the house, call the Fire Department.

•

A good plan emphasizes a quick escape. Do not investi-
gate first or attempt to fight the fire, and do not attempt to 
rescue belongings or valuables as this takes up time. 
Once outside, do not re-enter the house; wait for the Fire 
Department.

•

Write the plan down and rehearse it frequently so that should 
an emergency ever arise, everyone will know what to do. 
Revise the plan as conditions change; for example, when 
there are more or fewer family members in the home or if 
there are changes to the house.

•

Make sure your fire warning system is operational by con-
ducting weekly tests. If you are unsure about system oper-
ation, contact your smoke detector installer or dealer.

•

DSC recommends that you contact your local Fire Depart-
ment and request further information on home fire safety 
and escape planning. If available, have your local fire preven-
tion officer conduct an in-house fire safety inspection.

To test the smoke detector, press and hold the test button on the 
front of the unit. When the button is pressed, the unit’s alarm 
should sound. When the button is released, the alarm should 
cease. If this does not occur, check that the batteries are the cor-
rect type, in good condition and are installed correctly (see the 
‘Battery Installation’ section below). 
Upon completing the functional testing of the smoke detector, 
check the unit’s sensing chamber to ensure proper operation. To 
test the sensing chamber, wave a lit cotton wick or punk stick 
around the outside of the unit until a generous amount of smoke 
enters the sensing chamber or the unit alarms. If the smoke detec-
tor does not function properly, call your smoke detector installer or 
dealer for service.

The smoke detector is designed to require  minimum maintenance. 
If the case becomes dusty, vacuum with a small brush attachment. 
If the case is greasy, wipe the case gently with a soft cloth slightly 
dampened with soapy water.

If the unit is located in an area where it is exposed to high levels of 
dust or insects and causes false alarms, it may require service; con-
tact your smoke detector installer or dealer.