Digital Security Controls Ltd. 03RF5108 User Manual

This manual describes how to install, program and maintain the RF5108-433.
Before you install the RF5108-433 module, you should have completed the following steps
in your system installation:

1.

Plan the installation and wiring of the security system (see your system 

Installation

Manual

)

2.

Install the control panel, and install and enroll at least one keypad to use for
programming.

3.

Install and enroll any hardwired zone expander modules (PC5108) you plan to use.

NOTE: PC5108 zone expander modules occupy zones in 2 groups of 4 (e.g. zones 9-12 and
zones 13-16). None of the zones assigned to a PC5108 module may be used for wireless
devices.

Program the RF5108-433 from a system keypad or using downloading software on a remote
computer (e.g., DLS 2002). Read your system 

Installation Manual

 for more information.

Read this manual before you begin installing the RF5108-433. To install and set up the
RF5108-433 and wireless devices, follow these steps. Refer to the sections listed below.

1.

Temporarily mount  and wire the RF5108-433 module (see 

Section 2

)

2.

Enroll and program wireless devices (see 

Section 3

)

3.

Complete zone and other programming on the system (see 

Section 4

)

4.

Test the placement of all the wireless devices 

(see Section 5)

5.

Permanently mount the RF5108-433 receiver and wireless devices 

(see Section 5)

For additional information on trouble conditions, RF jamming signal detection and battery
replacement, see 

Section 6. 

 For help with troubleshooting, see 

Section 7.

WARNING: 

 for purchasing the RF5108-433 Wireless Receiver. This product

is the result of several years of development and will allow you to connect
up to 8 wireless detection devices to the PC580, PC585, PC1555, PC1565, and the Power
Series control panels.

The RF5108-433 operates at 433 MHz. It provides several advantages:

• supervisory transmissions are sent every 64 minutes at fixed time intervals for NA

version, 12 minutes for the EU version.

• programmable supervisory window can be as long as 24 hours
• diversity antenna arrangement for better RF reception
• 2 PGM Outputs

In addition, the RF5108-433 features:

•

  These new serial numbers include

hexadecimal digits.  

Please read  Section 3.1 “A note on Electronic Serial Numbers (ESN)”

for more information on enrolling 6-digit devices.

We are confident you will find the RF5108-433 Wireless Receiver a unique and useful
control panel enhancement.