Digital Security Controls Ltd. 12TR5164 User Manual

Testing Individual Wireless Keys
Do not use the individual device test described above to test wireless keys. To ensure that the TR5164

is receiving transmissions from these devices, use the function keys on the wireless keys at several

different points throughout the installation.

NOTE: Two-way wireless keys must be activated by pressing any key before they become

functional.

5.2 Mount the TR5164 and Wireless Devices

Once reception between the TR5164 and all wireless devices has been tested and verified (Section 5.1,

page 11), mount the TR5164 as follows:

1. Pull the Keybus wires through the hole at the bottom of the cabinet.

2. Mount the cabinet securely to the wall.
Mount the Wireless Devices
Mount the wireless devices once the placement test described in section 5.1 has been successfully

completed and three “good” results in a row have been achieved for each device. See the Installation

Sheet for each device for mounting instructions.

Now that the TR5164 and wireless devices are mounted and working properly, read Section 6.1, page

13, for information on potential wireless trouble conditions and battery replacement.

DRAFT