Digital Security Controls Ltd. 16LT7090 User Manual
Chapter 3.0 Arming the System
3.0 Arming the System
You can arm the system using the following options:
l
Integrated keypad
l
Tablet
l
User app
l
Wireless key (Refer to section 5.0 for a list of UL/ULC listed compatible wireless keys.)
3.1 Stay Arming
Stay Arming arms the perimeter of the premises while permitting movement inside.
To arm the system in Stay mode, do the following steps:
To arm the system in Stay mode, do the following steps:
1. Ensure all protected doors and windows are secure or bypassed and that the Ready
indicator is on.
2. Enter a valid user code and do not leave the premises. The system will automatically
ignore bypassed zones. Exit delay begins.
3. When exit delay is active , the Armed
and Ready indicators turn on and the keypad is
silent.
When the exit delay has expired, the system is armed and indicated by the following conditions:
l
The Ready indicator turns off.
l
The Armed indicator stays on.
Note: For SIA CP-01 listed panels, the Stay Arming exit delay will be twice as long as the Away
Arming exit delay.
If your system is installed in accordance with SIA CP-01 Standard for False Alarm Reduction, the
security system arms in the Stay Armed mode if the exit delay time expires and there is no exit.
3.2 Silent Exit Delay
If the system is armed in Stay mode or using the No-Entry arming method, the keypad buzzer is
silenced and the exit time is doubled for that exit period only. (SIA CP-01 only.)
silenced and the exit time is doubled for that exit period only. (SIA CP-01 only.)
3.3 Away Arming
Away Arming arms the entire system, including the perimeter and interior devices.
To arm the system in Away mode, do the following steps:
To arm the system in Away mode, do the following steps:
1. Ensure all protected doors and windows are secure or bypassed and that the Ready
indicator is on.
2. Enter a valid user code and exit the premises through a door programmed as entry/exit
type. Exit delay begins.
3. When exit delay is active , the Armed
and Ready indicators turn on and the keypad
beeps once per second. Depending on your system configuration, you have ____ seconds to
exit the premises. Your installer can program this time.
4. The keypad buzzer emits a distinct pulsating rate during the last 10 seconds of the exit
delay to indicate that the time is expiring.
5. To cancel the arming sequence, enter your access code.
- 10 -