Digital Security Controls Ltd. 17TL280LER User Manual
OFF: Ethernet receiver 2 is disabled.
[3] Reserved
[4] Cellular receiver 1 is enabled. Default (ON) OFF for TL2803G(R)E.
[4] Cellular receiver 1 is enabled. Default (ON) OFF for TL2803G(R)E.
ON: Cellular receiver 1 is enabled.
OFF: Cellular receiver 1 is disabled.
OFF: Cellular receiver 1 is disabled.
[5] Cellular receiver 2 is enabled. Default (ON) OFF for TL2803G(R)E.
ON: Cellular receiver 2 is enabled.
OFF: Cellular receiver 2 is disabled.
OFF: Cellular receiver 2 is disabled.
[6] Reserved
[7] DLS Over Cellular. Default (ON).
[7] DLS Over Cellular. Default (ON).
ON: DLS is enabled on the cellular path.
OFF: DLS is disabled on the cellular path.
OFF: DLS is disabled on the cellular path.
NOTE: Program this toggle as OFF to prevent DLS from using the cellular path.
NOTE: If this toggle is OFF, DLS sessions will occur on the Ethernet path only, regardless of the primary
NOTE: If this toggle is OFF, DLS sessions will occur on the Ethernet path only, regardless of the primary
path set in section [005] toggle option [4]. If it is ON, the communicator will connect to the primary
path first for DLS and if the session fails, the secondary path will be used.
path first for DLS and if the session fails, the secondary path will be used.
[8] Network Trouble Suppression. Default (OFF).
ON: GSM/Ethernet/Supervisory troubles and restore signals follow delay timer as programmed in
section [226].
OFF: GSM/Ethernet/Supervisory troubles and restore signals are sent immediately.
section [226].
OFF: GSM/Ethernet/Supervisory troubles and restore signals are sent immediately.
[007] DNS Server IP 1
Default (000.000.000.000)
Enter the IP address for DNS server 1. Format is 4 fields, each field is a 3 digit decimal. Valid range: 000-
255.
NOTE: If no value is programmed and DHCP is used, the DHCP server will configure the address. If an
Default (000.000.000.000)
Enter the IP address for DNS server 1. Format is 4 fields, each field is a 3 digit decimal. Valid range: 000-
255.
NOTE: If no value is programmed and DHCP is used, the DHCP server will configure the address. If an
address is programmed and DHCP is used, the programmed address will be used instead of the
DHCP address.
DHCP address.
[008] DNS Server IP 2
Default (000.000.000.000)
Enter the IP address for DNS server 2. Format is 4 fields, each field is a 3 digit decimal. Valid range: 000-
255.
NOTE: If no value is programmed and DHCP is used, the DHCP server will assign this value. If an
Default (000.000.000.000)
Enter the IP address for DNS server 2. Format is 4 fields, each field is a 3 digit decimal. Valid range: 000-
255.
NOTE: If no value is programmed and DHCP is used, the DHCP server will assign this value. If an
address is programmed and DHCP is used, the programmed address will be used instead of the
DHCP address.
DHCP address.
[009] Language
Default (01)
Default (01)
OPT Language OPT Language OPT Language OPT Language
01
English
09
Finnish
17
Not Used
25
Ukrainian
02
Spanish
10
German
18
Croatian
26
Slovakian
03
Portuguese
11
Swedish
19
Hungarian
27
Serbian
04
French
12
Norwegian
20
Romanian
28
Estonian
05
Italian
13
Danish
21
Russian
29
Slovenian
06
Dutch
14
Hebrew
22
Bulgarian
30-99 Reserved
07
Polish
15
Greek
23
Latvian
08
Czech
16
Turkish
24
Lithuanian
NOTE: Programming this section with an invalid language will default to English (01).
NOTE: After programming this section, perform a ‘Default Language in section [999][11] to have pro-
NOTE: After programming this section, perform a ‘Default Language in section [999][11] to have pro-
grammable labels available in the selected language.
Programming Options
[010] System Toggle Options 3
[1] 2-Way Audio Over Cellular. Default (OFF)
[1] 2-Way Audio Over Cellular. Default (OFF)
ON: 2-Way Audio Over Cellular is enabled.
OFF: 2-Way Audio Over Cellular is disabled.
OFF: 2-Way Audio Over Cellular is disabled.
[2] Visual verification. Default (OFF)
ON: Visual verification is enabled.
20