Digital Security Controls Ltd. 18LE2077 User Manual
44
[309] SMS Retry Counter
Default 000F Hex
0000 - 0005 = 5 seconds
0006-FFFE = 6 to 65534 Seconds
0000 - 0005 = 5 seconds
0006-FFFE = 6 to 65534 Seconds
FFFF = Use Default of 15 seconds (000F Hex)
[311] - [318] SMS Phone Number 1 - 8
This section may be programmed through DLS IV
or the keypad.
____________________________________
[321] - [328] SMS Phone Number 1 - 8
Toggle Options
|____| [1] SMS Notification Alarm/Restore
Default (OFF)
|____| [2] SMS Notification Tamper/Restore
|____| [2] SMS Notification Tamper/Restore
Default (OFF)
|____| [3] SMS Notification Opening/Closing
|____| [3] SMS Notification Opening/Closing
Default (OFF)
|____| [4] SMS Notification System Maintenance
|____| [4] SMS Notification System Maintenance
Default (OFF)
|____| [5] SMS Notification System Test Default
|____| [5] SMS Notification System Test Default
(OFF)
|____| [6] SMS Notification Internal Events
|____| [6] SMS Notification Internal Events
Default (OFF)
|____| [7] SMS Notification Enabled Default (OFF)
|____| [7] SMS Notification Enabled Default (OFF)
|____| [8] SMS Command and Control
Enabled Default (ON)
Default (Stay Arm);
Send this command to the system to stay arm.
____________________________________
Send this command to the system to stay arm.
____________________________________
Default (Away Arm);Send this command to the system to away arm.
____________________________________
____________________________________
Default (Night Arm);Send this command to the system to night arm.
____________________________________
____________________________________
Default (Disarm);Send this command to the system to night disarm.
____________________________________
[605] - [608] Activate Command Output 1 -
[605] - [608] Activate Command Output 1 -
Default (Activate Command Output n);
Send this command to the system to activate a
Send this command to the system to activate a
command output.
____________________________________
Default (Deactivate Command Output n);
Send this command to the system to deactivate a
Send this command to the system to deactivate a
command output.
____________________________________
Default (Bypass);
Send this command to the system to bypass a
Send this command to the system to bypass a
Zone.
____________________________________
Default (Unbypass);Send this command to the system to unbypass a
Zone.
____________________________________
[615] Status Request
[615] Status Request
Default (Status Request);Send this command to request the status of the
system.
____________________________________
____________________________________
[616] Alarm Memory Request
Default (Alarm Memory Request);Send this command to request the alarm memory
from the system.
____________________________________
____________________________________
Default (Help);Access Code is not required.
____________________________________
____________________________________
Default (Keypad Message);
[Account Label] _______________________
[Date and Time] _______________________
[SMS Function] _______________________
[Response] ___________________________
[Message Text]________________________
[Account Label] _______________________
[Date and Time] _______________________
[SMS Function] _______________________
[Response] ___________________________
[Message Text]________________________
[621] Function Successful
Default (Successful);Example: “stay armed successful.”
____________________________________
____________________________________