ADC Telecommunications Inc. FWM1901B User Manual

Page of 36
ADCP-75-246 • Issue 1 • 6/2008
Page 4
© 2008, ADC Telecommunications, Inc.
Figure 2. 2x1 microBTS User Interface
Table 1. 2x1 microBTS User Interface
REF 
NO
USER INTERFACE 
DESIGNATION
DEVICE
FUNCTIONAL
DESCRIPTION
1
No designation
NMO female RF 
connector
Connection point for the Network Listen 
antenna. 
2
Ground symbol
Threaded hole with 
hex socket screw 
Connection point for the grounding wire. 
3
Antenna symbol
N-type female RF 
coaxial connector
Connection point for the base station antenna 
cable. 
4
Network symbol
Sealed RJ-45 female 
connector
Connection point for the IP backhaul cable. 
5
No designation
Red LED
(off/red)
Indicates if the microBTS is powered and normal 
(off) or if a major fault is detected (red). 
6
115/230 VAC
47–63 Hz
6.8 AMP
Sealed 3-wire AC 
power connector
Connection point for the AC power cord. 
22589-A
(5) LED
INDICATOR
TOP VIEW
BOTTOM VIEW
(1) NETWORK LISTEN
ANTENNA CONNECTOR
(4) IP BACKHAUL
CABLE CONNECTOR
(2) GROUNDING WIRE
CONNECTION POINT
(6) AC POWER
CONNECTOR
NOTE: SHOWN WITH DUST CAPS REMOVED
(3) BASE STATION
ANTENNA
CONNECTOR