Microwave Radio Communications LLC NST2G7G User Manual
Page
18
NewS
tream
User Guide and Technical Manual
When you locate the preset that you want to load, press the blinking Enter Preset
button [Figure 5 item J]. This action automatically turns off any
button [Figure 5 item J]. This action automatically turns off any
NewS
tream
RF
transmitting device [for example: PA On, Carrier On or Cellular On]. The Enter button
will not be illuminated indicating that the
will not be illuminated indicating that the
NewS
tream
operating system has begun
loading the selected preset. Once the preset has been loaded, the Enter button is lit
green, indicating that the preset is operating normally. The 16x2 Preset display also
shows the preset that you have selected. Note that the preset loading state may last
ten or more seconds if you are switching from one operating mode to another [for
example ENG to SNG].
green, indicating that the preset is operating normally. The 16x2 Preset display also
shows the preset that you have selected. Note that the preset loading state may last
ten or more seconds if you are switching from one operating mode to another [for
example ENG to SNG].
The top line of the Preset 16x2 display presents
PRESET
, the preset’s number [1-99]
and the mode of operation. The second line displays The name that you have assigned
it up to 16 characters. If the name is greater than 16 characters, the display will scroll
through the entire name and then revert back to the fi rst 16 characters, providing the
ability to ensure that the correct preset has been selected.
it up to 16 characters. If the name is greater than 16 characters, the display will scroll
through the entire name and then revert back to the fi rst 16 characters, providing the
ability to ensure that the correct preset has been selected.
Preset Naming Using the Preset Display
• ENG and SNG cannot be used at the same time therefore only one active ENG
or SNG preset is valid.
• CNG mode can be used simultaneously with ENG / SNG or independently.
• Each preset name displays a prefi x of one of the following types:
• Each preset name displays a prefi x of one of the following types:
o
ENG – indicating microwave preset capability
o
SNG – indicating satellite preset capability
o
CNG – indicating cellular preset capability
o
ENG/CNG – indicating simultaneous microwave and cellular operation
o
SNG/CNG – indicating simultaneous satellite and cellular operation
o
MANUAL – indicates that
NewS
tream
is not operating in a preset mode.
Manual mode can be employed when an operator wants to test a setting without
modifying an existing preset.
modifying an existing preset.
Preset names can be duplicated in the radio, however
NewS
tream
differentiates presets
by the index number. It is not recommended to duplicate preset names since it can
cause issues with preset reordering. Up to 99 presets can be saved on
cause issues with preset reordering. Up to 99 presets can be saved on
NewS
tream
.
The fi rst line of the character display shows one of the 6 preset prefi xes followed by the
preset number. If the mode is manual, then the preset number is not displayed. The
second line of the character display shows the preset name, or it shows No Preset if
you are in Manual Mode.
preset number. If the mode is manual, then the preset number is not displayed. The
second line of the character display shows the preset name, or it shows No Preset if
you are in Manual Mode.