Microwave Radio Communications LLC NST2G7G User Manual
Page
51
NewS
tream
User Guide and Technical Manual
Microwave Status Page
[Continued]
Encoding Status
This set of fi elds present the settings to which the
NewS
tream’s
Encoder is currently
set. These fi elds are read-only.
Manual mode is accessed by the Setup drop-down menu. For further information refer
to the
to the
Manual Mode Pages
.
Video Status
This LED is lit green when video encoder is sending a signal to the designated receiver.
It is lit red when Video transmission has stopped or when the video encoder is powered
down.
This LED is lit green when video encoder is sending a signal to the designated receiver.
It is lit red when Video transmission has stopped or when the video encoder is powered
down.
Video Encoding
The Video Encoding fi eld displays one of three options:
The Video Encoding fi eld displays one of three options:
• MPEG2
• H.264
• External
• H.264
• External
ASI
Video Input
The Video Input fi eld displays one of the following options:
The Video Input fi eld displays one of the following options:
• NTSC
• NTSC No Pedestal
• PAL
• PAL-M
• PAL-N
• BARS-525
• BARS-625
• 720p50
• 720p59.94
• 1080i50
• 1080i59.94
• SDI-525
• SDI-625
• HD
• NTSC No Pedestal
• PAL
• PAL-M
• PAL-N
• BARS-525
• BARS-625
• 720p50
• 720p59.94
• 1080i50
• 1080i59.94
• SDI-525
• SDI-625
• HD
Bars
Video Bitrate
The Video Bitrate value ranges from 0-99.999 Mb/s.
The Video Bitrate value ranges from 0-99.999 Mb/s.
Profi le
The Profi le fi eld Profi le values differ depending on encoding type [H.264 or MPEG2].
The MPEG-2 SD example is:
The Profi le fi eld Profi le values differ depending on encoding type [H.264 or MPEG2].
The MPEG-2 SD example is:
• 4:2:0
MP@ML
• 4:2:2
P@ML