Microwave Radio Communications LLC NST2G7G User Manual
Page
89
NewS
tream
User Guide and Technical Manual
Figure 39:
NewS
tream Frequency Plans Web Page [SNG]
Satellite Options
With
BUC [Block Up-converter Enabling]
The Block Up-converter [BUC] is used in the transmission [uplink] of satellite signals. It
converts a band of frequencies from a lower frequency to a higher frequency. Modern
Block Up-converters convert from the L band to Ku band, C band and Ka band. Click
the check box to enable this feature.
converts a band of frequencies from a lower frequency to a higher frequency. Modern
Block Up-converters convert from the L band to Ku band, C band and Ka band. Click
the check box to enable this feature.
BUC LO Type
The BUC [Block Up-Converter Enabling] LO [Local Oscillator] Type drop-down provides
a means of selecting between low side and high side, where low is the standard and
default setting.
a means of selecting between low side and high side, where low is the standard and
default setting.
BUC Frequency
This fi eld displays the BUC Frequency for which your up-converter will communicate
with the
This fi eld displays the BUC Frequency for which your up-converter will communicate
with the
NewS
tream
system. This frequency starts at 0 and can be raised in 1 kHz
increments using the entry fi eld.