Microwave Radio Communications LLC ODU7ATXAD User Manual
Advanced Operations
5-29
MTX5000 User and Technical Manual
Notes
When saving the new custom digital Preset in the
following step, the Preset number will automatically
be increased to the next available Preset number
to avoid overwriting an existing Preset.
following step, the Preset number will automatically
be increased to the next available Preset number
to avoid overwriting an existing Preset.
If you wish to overwrite the existing Preset number
(unless it is a factory default Preset), enter the
Preset number to be overwritten. A warning
message will be displayed asking “Are you
sure?”. Select the Yes option button.
Once an existing custom Preset is overwritten, it
cannot be recovered. It must be re-entered from
scratch.
99.
Select the Save option button and observe the
numeric keypad is displayed.
numeric keypad is displayed.
See Figure 5-64
.
Figure 5-64: Numeric Keypad - Typical
Notes
When saving Presets in the following steps, Preset
A thru Preset J are factory default Presets. The
factory default Preset numbers cannot be changed.
A thru Preset J are factory default Presets. The
factory default Preset numbers cannot be changed.
1
2
3
4
7
5
6
8
9
CLR
0
ESC
ENT
Next Available
Preset Number
Preset Number
Notes
To change the default Preset number, perform
step
100
and go to
step 101
.
To accept the next available Preset number, go to
step 101
100.
Select the CLR key and enter the Preset number
required.
required.
101.
Select the ENT key and observe the Are you sure?
confirmation screen is displayed.
confirmation screen is displayed.
See Figure 5-65
.
Figure 5-65: Confirmation Screen
102.
Select the YES option button and observe the Please
Wait! message box is displayed.
Wait! message box is displayed.
See Figure 5-66
.
Figure 5-66: Please Wait Message Box
103.
After a short delay, observe the Save As Preset
screen is displayed.
screen is displayed.
No
Are you sure?
Yes
No
Please Wait!
Yes