Microwave Radio Communications LLC PTX127T1CG User Manual
Installation
6-5
PTX-PRO User and Technical Manual
Figure 6-5: Complete Tripod Installation - Typical
6.6
Power Connections
6.6.1
Power Requirements
The PTX-PRO has the following power requirements, depending
upon the power option utilized.
upon the power option utilized.
Supply Voltage:
+11.0 to +36 Volts DC
90 to 264 VAC, 50/60 Hz
Quick Release
Mount
Mount
PTX-PRO (Typical)
Antenna Lock
Plate
Plate
Antenna
(2 Options
Shown)
(2 Options
Shown)
Tripod
Power Consumption:
50 watts nominal
6.6.2
Power Supply and Distribution
AC or DC power is supplied externally, from an external power
source.
source.
CAUTION
Avoid possible equipment damage. If you
are using a DC power source for your PTX-
PRO, do not exceed 36 volts DC input
power.
are using a DC power source for your PTX-
PRO, do not exceed 36 volts DC input
power.
Power is distributed to the PTX-PRO through the front panel
PWR connector on the PTX-PRO.
PWR connector on the PTX-PRO.
CAUTION
To avoid possible equipment damage, turn
off DC Power on the coax before connecting
any test equipment.
off DC Power on the coax before connecting
any test equipment.
Panel Power Connections
The PTX-PRO power connector is
located on the front panel. The mating connector that plugs into
this panel connector is described below.
this panel connector is described below.
Manufacturer:
ITT Cannon
Part Number
KPTR06F14-12SX
Description:
12-Pin, Female, Plug
Manufacturer:
Amphenol
Part Number
PT06E14-12SX
Description:
12-Pin, Female, Plug