Buffalo 04600039-0 User Manual

Wireless-G PCI Adapter

13

Instant Wireless

®

Series

12

4. The screen in Figure 6-6 will

appear if your connection is
active.

For more information about WEP, refer to your access point’s documentation,
or visit www.linksys.com.

For more information about wireless networking on a Windows XP computer,
enter the keyword wireless in the Windows XP search engine.

2. The screen that appears will show any available wireless network. Select the

network you want. 

If you have already enabled WEP encryption on your network, skip ahead
to step 3. 

If you have NOT
enabled WEP encryp-
tion on your network,
the screen in Figure 6-4
will appear. Check the
box next to Allow me to
connect to the selected
wireless network, even
though it is not secure.
Then click the Connect
button and continue to
step 4.

3. The screen in Figure 6-5 will appear. Enter the WEP key of your wireless

network in the Network key field, and re-enter it in the Confirm network key
field. Then, click the Connect button.

Note: In Steps 2 and 3, these are the instructions and screenshots for
Windows XP with Service Pack 1 installed. If you have not installed
Service Pack 1, select the network you want, and click the Connect
button. If the network has WEP encryption enabled, enter the WEP
key in the Network key field, and then click the Connect button.

Note: Wireless Zero Configuration does not support the use of a
passphrase. Enter the exact WEP key used by your access point.