Buffalo 09101695-0 User Manual

- 56 -

Chapter 3  Configuration

Device

Displays information for attached USB disks.  Disks are removed 
when [Remove] in the Device column is clicked.

Disk Assignment

A disk number will be automatically assigned to the disk or you can 
choose a number.  Select a disk number, or select [Do not assign], 
then click [Apply].

Partition Information

Displays the partition information for the selected USB disk.  Click 
[Format] to format the disk.  Note:  formatting a disk will erase all 
information on it.  

Re-recognize USB devices

Click this to re-scan for connected USB disks.  

Automatic USB Disk Assignment

Check [Enable] to automatically select an attached USB hard disk.  
The entire drive will be used as the shared folder.  To configure your 
disk and share manually, uncheck [Enable].

FAT format file name character code

Select the character code for filenames in FAT formatted partitions.

HDD power-saving function

Click [Enable] to enable power saving mode.

HDD stop time

Powers down the drive after this duration of time.