Buffalo 09101884-0 User Manual

WCR-HP-GN User Manual

21

Follow the procedure below to open the web-based configuration interface.

Launch a web browser.

Enter the router’s LAN-side IP address in the address 
field, and press the [Enter] key.

Note: 

･ The AirStation’s default LAN-side IP address depends on its mode setting.

 

  In router mode:  192.168.11.1

 

  In bridge mode:  192.168.11.100

 

･ If you changed the IP address setting, then use the new IP address.

Enter [root] (lower case) for the username and 
the password that you set during initial setup.  
Click [OK].

Note: 

･ By default, the password is blank (not set).

 

･ If you forget your password, hold down the 

Reset button (page 10) to initialize all settings. 
The password will then be blank.

 

  Note that all other settings will also revert to 

their default values.

The web-based configuration tool lets you change advanced settings for the AirStation. Don’t 
change these settings unless you know what you’re doing.