Buffalo 09101896-0 User Manual
Setup -> Basic Setup
WAN Setup
o
Choose “Disabled” for “Connection Type” (this will be set
automatically).
Network Setup
o
Enter the desired LAN-side IP address for the router into “Router
IP”.
o
“Disable“ “DHCP Server”.
Time Settings
o
Choose your time zone.
Click “Save”.
Wireless -> Basic Settings
Wireless -> Basic Settings
Enter your country in “Regulatory Domain”.
In the “Antenna Gain” field, please enter the gain of your
In the “Antenna Gain” field, please enter the gain of your
AirStation’s antenna. The firmware will adjust the transmit power
automatically to meet regulatory requirements. Please note that the
use of a long extension cable for your antenna will reduce the
usable antenna gain.
automatically to meet regulatory requirements. Please note that the
use of a long extension cable for your antenna will reduce the
usable antenna gain.
Configure “Wireless Mode” to “Client Bridge”.
Set “Wireless Network Mode” to match the access point you want to
Set “Wireless Network Mode” to match the access point you want to
connect to.
Enter the network name (SSID) of the AP you want to connect to.
Click “Save”.
Click “Save”.
Wireless -> Wireless Security
Configure security to match the security settings of the access
point you want to connect to.
Click “Apply Settings”.
After the router reboots, please confirm that it has connected to the
access point. If there is a DHCP server available on the access point
After the router reboots, please confirm that it has connected to the
access point. If there is a DHCP server available on the access point
- 22 -