Buffalo 09101912-0 User Manual

Chapter 4  Configuration

49

Broadcast SSID

If [Allow] is checked, then the AirStation will respond to SSID 
searches from wireless devices by broadcasting its SSID. If [Allow] is 
unchecked, then the AirStation ignores SSID searches from wireless 
devices. 

[Allow multiple SSIDs]
[Use Single SSID]

Clicking [Allow multiple SSIDs] will enable Multi Security, allowing 
the use of multiple SSIDs, each with different wireless security 
settings. Clicking [Use Single SSID] will disable Multi Security. 
The AirStation will then allow one SSID and one type of wireless 
security.

Note: When using Multi Security, enable at least one of the following:  

SSID1,or SSID2.

SSID1

Multi Security SSID1 can use WPA-PSK-AES, WPA2-PSK-AES, or WPA/
WPA2-Mixed for wireless security.

SSID2

Multi Security SSID2 can use WEP for wireless security.

Separate

When enabled, wireless devices connected to the AirStation can 
communicate only with the Internet side, not with each other.

SSID

Set SSID using 1 - 32 alphanumeric characters.

Wireless authentication

Specifies an authentication method used when connecting to a 
wireless device.