Buffalo 09101938-0 User Manual

WCR-G300 / WCR-HP-G300 User Manual

23

To access the AirStation’s advanced settings, use the web-based configuration interface.

Follow the procedure below to open the web-based configuration interface.

Launch a web browser.

Enter the router’s LAN-side IP address in the address 
field, and press the [Enter] key.

Note: 

･ The AirStation’s default LAN-side IP address depends on its mode setting.

 

  In router mode:  192.168.11.1

 

  In bridge mode:  192.168.11.100

 

･ If you changed the IP address setting, then use the new IP address.

Enter [root] (lower case) for the username and 
the password that you set during initial setup.  
Click [OK].

Note: 

･ By default, the password is blank (not set).

 

･ If you forget your password, hold down the 

Reset button (page 11) to initialize all settings. 
The password will then be blank.

 

  Note that all other settings will also revert to 

their default values.