Buffalo 09102110-0 User Manual
1
2
3
4
2
3
4
5
Chapter 1 Product Overview
WPL-05G300 Series User Manual
7
Hardware Overview
Front Panel LEDs
1
Power LED
Indicates the status of the AirStation power and PLC.
On (Green) :
Indicates the status of the AirStation power and PLC.
On (Green) :
Power is on.
Blinking (Green) :
PLC connection in progress.
2 blinks (Green)
:
PLC connection failed.
PLC connection timeout.
Either hold down the PLC button for 1 to 3 seconds, or wait for about 30
minutes for the indicator (green) to turn on.
PLC connection timeout.
Either hold down the PLC button for 1 to 3 seconds, or wait for about 30
minutes for the indicator (green) to turn on.
3 blinks (Green)
:
Disconnecting the PLC connection.
Off :
Power is off.
2 blinks (Amber)
*1
: Flash ROM error.
3 blinks (Amber)
*1
: Wired Ethernet LAN error.
4 blinks (Amber)
*1
: Wireless LAN error.
5 blinks (Amber) :
IP address setting error.
Continuously
blinking (Amber)
blinking (Amber)
*2
:
Updating firmware, saving settings, or initializing settings.
*1
Turn off AirStation first, wait for a few seconds, then turn it back on.
*2
If the power LED keeps blinking, do not turn off the AirStation nor unplug its power
cable.