Buffalo 000000004 User Manual
86
Appendix B - TCP/IP Settings
Windows 8.1/Windows 8
To configure TCP/IP in Windows 8.1 or Windows 8, follow the procedure below.
1
Open Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Change adapter settings on the left side menu.
5
Right-click the network adapter, then click Properties.
6
If the User Account Control screen opens, click Yes or Continue.
7
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
8
To have DHCP set your IP address settings automatically, check Obtain an IP address automatically and Obtain DNS
server address automatically.
server address automatically.
Alternately, you can configure the settings manually. For example:
If the router’s IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: blank
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: blank
9
Click OK.