Buffalo 000000004 User Manual

9

Power Connector 
Connect the power adapter here.

Power Button
This button turns the power on and off .

LAN Ports
With Auto-MDIX, you can use straight or crossover Ethernet cables. LAN port 1 supports PoE.

EZ Analyzer Port
This port is reserved for the upcoming EZ Analyzer function. It is disabled for this firmware release.

USB Port
Connect a USB device here to upgrade firmware or save logs.

USB Eject Button
Before unplugging a USB device, hold down the USB eject button for 3 seconds. The USB LED will begin to blink. 
Then you can unplug the USB device safely.

USB LED (Green)
On: 
USB device is being used.
Randomly blinking: 
USB device can be removed.

RJ-45 Serial Console Port for Settings
This port is reserved for additional functionality in the future. It is disabled for this firmware release.

Reset Button
To reset all settings, hold down this button until the diag LED comes on (about 3 seconds). Power must be on.

AOSS/WPS button
To start AOSS (or WPS), hold down this button until the wireless LED blinks twice (about 1 second).

Maintenance port
For factory use only.