Buffalo 000000019 User Manual

14

Configure advanced wireless settings here.

Enter the SSID of the access point that you want to connect to.
SSIDs may contain up to 32 alphanumeric characters, hyphens (-), and 

underscores (_).

Select the same authentication method that your wireless router or access 

point uses.

Open (No Authentication)
Choose this if your network uses no authentication or WEP.
WPA
WPA uses PSK authentication, TKIP or AES encryption, and a pre-shared key.
WPA2
WPA2 uses PSK, AES encryption, and a pre-shared key. 

Select whether to enable or disable WEP encryption.

Select the number of the WEP key you want to use (1 - 4). This WEP key should 

be same as the one your access point is configured with.