Buffalo 000000020 User Manual
4
Back Panel
1
Mode Switch
This switch changes between router mode and bridge (access point) mode. Auto mode will enable or disable
router functionality automatically.
This switch changes between router mode and bridge (access point) mode. Auto mode will enable or disable
router functionality automatically.
2
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps and
100 Mbps connections.
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps and
100 Mbps connections.
3
Internet Port
10 Mbps, 100 Mbps and 1000Mbps connections are supported.
10 Mbps, 100 Mbps and 1000Mbps connections are supported.
Note: In bridge (access point) mode, the Internet port becomes a regular LAN port, for a total of 5 usable LAN ports.
4
Reset Button
To reset all settings, hold down this button until the power/diag LED turns red (about 3 seconds). The power must
be on for this to work.
To reset all settings, hold down this button until the power/diag LED turns red (about 3 seconds). The power must
be on for this to work.
5
DC Connector
Connect the included AC adapter here.
Connect the included AC adapter here.