Buffalo 000000021 User Manual
4
Bottom
5
Wireless Security Label
This label shows the default settings for connecting to the device wirelessly.
This label shows the default settings for connecting to the device wirelessly.
Side
6
AOSS Button
With the power on, hold down this button until the AOSS LED starts flashing (about 2 seconds) to start AOSS.
With the power on, hold down this button until the AOSS LED starts flashing (about 2 seconds) to start AOSS.
7
Power Button
Press to turn the unit on. To turn it off, hold it down until the power LED turns off.
Press to turn the unit on. To turn it off, hold it down until the power LED turns off.
8
USB Connector
To connect to a computer, connect the supplied USB data cable to this port.
To connect to a computer, connect the supplied USB data cable to this port.
9
Reset Button
To reset the unit to its factory default settings, use a straightened paperclip to hold down this recessed button
until the power LED turns red. The MiniStation Air should be connected to power while you do this. Resetting
the unit will not erase stored data on the drive.
To reset the unit to its factory default settings, use a straightened paperclip to hold down this recessed button
until the power LED turns red. The MiniStation Air should be connected to power while you do this. Resetting
the unit will not erase stored data on the drive.
10
Power Connector
To charge the unit, connect the supplied USB power cable to this port.
To charge the unit, connect the supplied USB power cable to this port.
11
USB Connector
To charge a smartphone, connect its USB charging cable to this port.
To charge a smartphone, connect its USB charging cable to this port.