Lg Electronics LSP2000 User Manual

   

 

10

 

You should follow each step carefully as shown below in order to guarantee proper 
operation of CDMA Fixed Wireless Telephone. 

 

l Fixed Wireless Terminal is supplied with the following standard unit and accessories; 

1. LSP-200 Main Unit with Handset  -1EA- 
2. Dipole Antenna   -1EA- 
3. Backup Battery   -1EA- 
4. User Guide   . -1EA- 
5. AC/DC Power Adapter  -1EA- 
6. Power Cord(Only SMPS Adapter) -1EA- 

 

l Please make sure that these components are present before you begin the unit 

installation. And then compare the following figures and components. If components 
are missing or damage is found, contact the store where you purchased the unit 
immediately.  

 

l Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious 

damage may result if the unit falls. Do not place the unit on, or within 1 meter of 
heaters or radiators. This unit is designed for desktop usage. Avoid direct exposure to 
the sun lights and damp area.  

l Read the SAFETY INFORMATION located at the first part of this document before you 

place the terminal 

 

l Connect the antenna to the TNC antenna connector located at the top side of the 

terminal. If you placed the terminal on the flat surface, bend the antenna up right.  

l Connect curl cord of handset assembly to the RJ-11C port located at the left side of the 

terminal. 

l Open the battery case, securely connect the battery cord, place the backup battery 

pack and close the case. 

l Connect the AC/DC Adapter cable to the DC input port located at the topside of the 

terminal. 

l Please follow the below to get better voice quality; 

1.  Keep away from electrical appliances such as TV, computer, radio and so on. 
2.  Keep terminal in a high and central location with no obstructions, such as metal     

  walls. 

3.  Raise the integral antenna of terminal to get maximum strength of receive signal  

      as shown figure at the next page.