Lg Electronics LST200 User Manual

16

Voice Mail – Use voice mail service in the same manner as you would on a regular telephone.
If your have a new voice-mail message, the WLL-terminal transmits a special Voice-Mail
Notification Ring (1sec On / 4sec Off) and Mode LED is blinking (0.5sec On/0.5sec Off).
Please contact your cellular service provider for more information on using Voice Mail.

Caller ID – LST-200/2200 can support Caller ID service if you have a telephone with Caller ID
feature. Please contact your cellular service provider for more information on using this
service.

Data Communication - LST-200/2200 is capable of transmitting and receiving IS-99 Fax or
modem communications. For data communications, you will need a data communication kit
and a diskette where needed. For further information, please contact our authorized service
dealer.

Multi-extension Installations - For a multi-extension installation, make sure that all the
extensions are on-hook. If one extension is off-hook (not hung up), none of the extensions on
that line will ring when a call is being received.

PBX/KSU System - Your fixed wireless terminal should be connected to a loop-start
PBX/KSU as a standard DID/DOD trunk. Do not parallel the terminal line with an incoming
telephone line. It may damage the interface in the terminal. Only an experienced telephone
technician should install it.