Lg Electronics LST230 User Manual
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
20
Operation
1. Make a speed dial function enable.
2. Lift handset and dial tone will be heard.
3. Press speed dial number and wait for dial timeout(5 seconds).
5.2 Emergency Call(Enblock mode only)
LST-230(F)/2300(F) has 3 emergency call numbers (1~3) and max. 32 digits can be stored in each emergency
call number.
call number.
Entering the emergency phone number
1. Press “#”+”#”+”2” continuously to enter emergency call programming mode.
2. Press “#” and one of the emergency memory location numbers (1~3).
3. Press “#” and the phone number (Max. 32 digits).
4. Press “*” to save and enable this function.
Enable or Disable emergency call
1. Press “#”+”#”+”2” continuously to enter emergency call programming mode.
2. Press “#” and Enable code (“1”) or Disable code (“2”).
3. Press “*” to save.
If Emergency Call is disabled and Emergency Call number has been already programmed, you can
make enable Emergency Call by pressing “#’+”#”+”2”+”#” + ”1”+”*” without entering a emergency call
number again.
make enable Emergency Call by pressing “#’+”#”+”2”+”#” + ”1”+”*” without entering a emergency call
number again.
5.3 Hot Line(Enblock mode only)
While the Hot line function is enabled, the programmed number will be automatically dialed when you pick up
the handset and wait for the programmed hot line time (1~10sec) without any key press.
the handset and wait for the programmed hot line time (1~10sec) without any key press.
Programming the Hot Line number
1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.
2. Press “#” and Hot Line Enable code “1”.
3. Press “#” and Hot Line phone number (Max. 32 digits).
4. Press “*” to save and enable this function.
Enable the Hot Line Feature
1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.
2. Press “#” and Hot Line Enable code “1”.
3. Press “*” to save.