TransCore 05531 User Manual
Encompass 4/4800 Multiprotocol Reader System Guide
C-4
Figure C-1 DB9 and DB25 Connector Pin Assignments for Signal to Host
Note: In
Figure C-1
, supported pin assignments are boldface.
Cable Supplied with the Encompass 4/4800 Multiprotocol
Reader
Reader
The Encompass 4/4800 Multiprotocol Reader is delivered with a multiwire cable
(ordered as a separate accessory), which is a 13-pair pigtail. An alternate 15-pair pig-
tail may be substituted. The 13-pair pigtail is a colored-wire pair cable, with different
colors denoting the individual pairs, one pair of which is red/black. The alternate 15-
pair pigtail is a red/black-wire pair cable, with numbers on the pairs to denote the indi-
vidual pairs. Two pairs of the 15-pair pigtail, numbers 14 and 15, are not used.
(ordered as a separate accessory), which is a 13-pair pigtail. An alternate 15-pair pig-
tail may be substituted. The 13-pair pigtail is a colored-wire pair cable, with different
colors denoting the individual pairs, one pair of which is red/black. The alternate 15-
pair pigtail is a red/black-wire pair cable, with numbers on the pairs to denote the indi-
vidual pairs. Two pairs of the 15-pair pigtail, numbers 14 and 15, are not used.