TransCore 05531 User Manual
Command Quick Reference
D-5
a. Local laws apply. The authorized frequency band for the TransCore Encompass 4/
4800 Multiprotocol Reader in the United States is 912.5 MHz to 919 MHz. Contact
TransCore if your application requires a frequency outside of this range.
4800 Multiprotocol Reader in the United States is 912.5 MHz to 919 MHz. Contact
TransCore if your application requires a frequency outside of this range.
b. The Encompass 4/4800 Multiprotocol Reader system does not include a real-time
clock. The dual-protocol Encompass 4/4800 Multiprotocol Reader internal timing var-
ies depending on the operative tag read mode and the type of tag in the read field.
Unless stated otherwise, values listed for timing-related command variables assume
an ID operational tag read mode (64-bit ID data from eGo tags, ignore ATA tags) and
an eGo-compatible tag in the read field and these values may vary.
clock. The dual-protocol Encompass 4/4800 Multiprotocol Reader internal timing var-
ies depending on the operative tag read mode and the type of tag in the read field.
Unless stated otherwise, values listed for timing-related command variables assume
an ID operational tag read mode (64-bit ID data from eGo tags, ignore ATA tags) and
an eGo-compatible tag in the read field and these values may vary.
Numerical Command List
The following conventions are used in Table D-2:
•
Items in bold italics identify factory default settings.
•
Only the command-related data portion of the reader message is shown.
•
A single asterisk (*) indicates that the command has been altered so that it is dif-
ferent from the AI1620 SmartPass command.
ferent from the AI1620 SmartPass command.
•
A double asterisk (**) indicates a new command or added value that is not present
in the AI1620 SmartPass command list.
in the AI1620 SmartPass command list.
•
A triple asterisk (***) indicates an Encompass 4/4800 Multiprotocol Reader com-
mand that is supported only in the Encompass 4/4800 Multiprotocol Reader Soft-
ware Version TBD.
mand that is supported only in the Encompass 4/4800 Multiprotocol Reader Soft-
ware Version TBD.
Refer to
Chapter 6, “Communication Protocols,
” for the complete syntax of com-
mands and messages.
The Encompass 4/4800 Multiprotocol Reader system does not include a real-time
clock. The dual-protocol Encompass 4/4800 Multiprotocol Reader internal timing var-
ies depending on the operative tag read mode and the type of tag in the read field.
Unless stated otherwise, values listed for timing-related command variables assume
an ID operational tag read mode (64-bit ID data from eGo tags, ignore ATA tags) and
an eGo tag in the read field and these values may vary. See
clock. The dual-protocol Encompass 4/4800 Multiprotocol Reader internal timing var-
ies depending on the operative tag read mode and the type of tag in the read field.
Unless stated otherwise, values listed for timing-related command variables assume
an ID operational tag read mode (64-bit ID data from eGo tags, ignore ATA tags) and
an eGo tag in the read field and these values may vary. See
for more information.
Store hardware configuration
Hardware configuration not
known
known
696
Input status change reports
Disabled
820
Automatic periodic RF status
report
report
Disabled
830
Table D-1 Encompass 4/4800 Multiprotocol Reader Default Configuration
Settings (continued)
Settings (continued)
Parameter
Setting
Command