Wulfsberg Electronics Division 2000-800A User Manual
P-2000/C-2000/RT-2000
OPERATOR’S MANUAL
Page 22 of 40
Publication No. 150-049105
Operator’s Manual
Rev. B
Dec 2004
Frequency Fields (FRQ:) – These fields display the current channel’s receive and transmit frequencies.
Tone Fields (TN:) – These fields display the current channel’s transmit and receive CTCSS/DCS (PL/DPL) tones.
NAC Code Fields (NAC:) – These fields display the current channel’s transmit and receive NAC codes used on
P-25 systems.
P-25 systems.
Type Fields (Type:) – This field displays whether the channel is Analog, Digital, or Mixed (Analog and Digital).
Bandwidth Field (BW:) – This field displays the currently selected channel’s bandwidth in kHz.
Editing a Preset Channel
Currently only changing of the transmit power is allowed for editing a preset channel.
Changing Transmit Power
The P-2000 supports the selection of high and low transmit power. Normally high power is used, however, if
interference or other transmit issues are experienced, low power may be selected to help remedy the issue. You can
alter the transmit power setting from the EDIT PAGE as follows.
interference or other transmit issues are experienced, low power may be selected to help remedy the issue. You can
alter the transmit power setting from the EDIT PAGE as follows.
Move the cursor under the transmit power field.
Rotate the VALUE knob clockwise once. The power indicator will toggle between high and low with each turn of
the VALUE knob.
the VALUE knob.
Press the HOME button or the BACK button to exit the mode and return to the normal operating page.