KYE Systems Corp KM010 User Manual
z
Press Right key and Wheel key at the same time for 3 seconds to change the DPI setting:
z
Green Led – 800dpi (Default)
z
Amber Led – 1200dpi
z
Red Led – 1600dpi
Æ
Æ
Green Æ Amber Æ Red
7.
Specifications
〔Mouse〕 Weight : 86.5g
- Dimensions : 102.5(L)mm x 69.3(W)mm x 40.2(H)mm
- Power: Power rating 2.4V~3.2V DC; Current : 10mA( Max) @ 3V at Active mode.
- Power: Power rating 2.4V~3.2V DC; Current : 10mA( Max) @ 3V at Active mode.
〔Receiver〕Weight : 1.65g
-Dimensions : 18.89(L) x 12.98(W) x 5.62(H)mm
8. System Requirements
-IBM or compatible PC
-Compatibility (1) Hardware: USB Port
-Compatibility (1) Hardware: USB Port
(2) Operating Systems: Windows 2000, XP SP2, Vista 32/64bit
9. Certification
See label under Mouse module
10. Operating Tips
See label under Mouse module
10. Operating Tips
z
Avoid using the mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency
transmission and may slow down the mouse’s response time or cause the mouse to fail temporarily.
transmission and may slow down the mouse’s response time or cause the mouse to fail temporarily.
z
The mouse enters to Sleep mode whenever your computer does. To activate the mouse, just move or click the
mouse.
mouse.
z
Laser mouse works best in non-reflective surface.
If cursor movements are lagging, placing the mouse on a mouse pad will help. Darker surface requires more
energy to operate thus consumes more battery power.
If cursor movements are lagging, placing the mouse on a mouse pad will help. Darker surface requires more
energy to operate thus consumes more battery power.
z
Different battery types and temperatures may affect the battery performance.
z
The battery and the wireless module may be warm when being used continuously for an extended period of time.
This is normal and not a malfunction.
This is normal and not a malfunction.
z
Conserve the battery power by switching the on/off switch to “off” position while traveling or if the mouse will
not be in use for awhile. If you will not use the mouse for a long period of time. Remove the batteries from the
battery compartment.
not be in use for awhile. If you will not use the mouse for a long period of time. Remove the batteries from the
battery compartment.
11. Troubleshooting
When the mouse doesn’t work:
z
When the mouse doesn’t work:
z
Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must
match the right connections in the battery compartment.
match the right connections in the battery compartment.
z
Check if the receiver’s USB plug is firmly connected to the USB port on your computer.
z
Make sure that the appropriate device drivers are installed.
z
Make sure that you have made a radio link between the mouse and its receiver.
The response time of the mouse is slow or the mouse intermittently stops working
z
z
Make sure the power of battery is sufficient
z
Turn off any wireless devices and their base units that are near the mouse’s receiver.
z
If you are using the mouse on a metal surface, move it to a non-metal surface. Metals such as iron, aluminum, or
copper shield the radio frequency transmission and may influence the mouse’s response time or cause the mouse
to fail temporarily.
copper shield the radio frequency transmission and may influence the mouse’s response time or cause the mouse
to fail temporarily.