Lotek Wireless Inc SRX600 User Manual

. . . . .

T H E   K E Y P A D   A N D   L C D   D I S P L A Y

 2 - - Page 19 

Once a value is entered for an input, pressing the Enter key causes the receiver to 
accept that input and save it (as long as the receiver is Online).

The END/ESC key is used for navigation and cancelling the effect of an input. 

For navigation it provides the ability to “go back” to the last menu that was 
accessed. For example, after enabling TOA, press END/ESC to go back to the Scan 
Options menu (where the TOA feature was accessed).

Cancelling the effect of an input takes on two forms:

• Cancelling an input before it is completely entered (e.g, while entering 

148.08_). Many inputs are automatically accepted as soon as the number is 
fully entered. If a number is only partially entered and it is realized that the 
input is not desired, then press the END/ESC key to cancel.

• If the receiver is Online then the END/ESC key is used to stop a current active 

state of the receiver (e.g. GPS position acquisition or a Scan Cycle). This action 
is dependant on the status of the receiver. For example, if the receiver is not 
trying to acquire a GPS position, then the END/ESC key has no effect. If the 
receiver is Offline then the END/ESC key has no effect.

Any of the keys that have a number (0 through 9) in their lower portion are used 
in two ways: to select a menu item or to enter in values for an input. 

In the first case, all menu items available have a number in front of them (e.g. 1) 
Gain

). In order to select a menu item, press the corresponding number on the 

keypad (e.g. press 1 to go to the Gain menu). 

In the second case, for example, when prompted to enter a value for gain, use the 
keypad numbers to enter the desired value.