Lotek Wireless Inc SRX600 User Manual

. . . . .

M A N U A L   M O D E

 4 - - Page 31 

 mode provides the ability to collect data without using a Configuration 

(see the Codelog Mode chapter for details on Configurations). During manual 
mode data is not recorded by the receiver. Detections are indicated by pings or 
clicks that can be heard from the speaker on the front panel of the receiver. Adjust 
the volume by turning the OFF/VOL knob clockwise. 

For listening to weak signals or working in environments with a lot of 
ambient noise, use a pair of good quality isolating (monaural) headphones.

Some of the receiver’s settings can be changed while in manual mode.  After 
selecting the Manual key on the keypad, three menu items become available: 1) 
Code Set, 2)Search 

and 3)Signal. 

The first menu item, Code Set, provides the ability to change the active code set. 
After selecting 1)Code Set, use the keypad to select the desired code set. 

The other two menu items, Search and Signal, provide two different methods of 
starting a scan in manual mode and changing various settings that affect the scan.

There are several settings that are the same in either Search or Signal. These are as 
follows:

• Start a scan 

• Setting the type of transmitter to scan (Beep/ID/Sensor)

• Change the Set Delta frequency and/or gain 

• Acquire a GPS 2D position 

• Enter a gain

• Set the noise threshold