MAXCOM MOBILE 5130S User Manual
12
Making an IDD
If you need to make an international call, press and hold the * key until the prefix symbol “+”
of international long distance call appears on the screen , and you can make a call in any
country when you don’t know the local prefix number of international call (for example, +86
in China).
Enter the prefix number, and then enter the country code and full phone number. The country
codes are according to the international tradition, and Germany is 49, UK 44, Sweden 46, etc.
To make an IDD: “+” Country code + Complete telephone number + Call key
Calling extension
Some extensions of fixed telephone can’t be dialed through directly and you need to dial
through the exchange before dialing the extension. If you insert the pause symbol P between
the exchange number and the extension number when you input the phone number, the mobile
phone will complete the dialing and dial extension automatically. To enter “P”: press and hold
the stylus, or press * for three times (the symbol “P” appears on the screen).
To call extension of fixed telephone (excluding +):
Telephone number + P + Extension number + Call key
Emergency call
You can always make emergency call when you are in the coverage area of the network (you
can know by checking the indicating stripe of network signal intensity on the upper left corner of
the screen). If your network operator doesn’t provide roaming service in your area, the characters
of “EMERGENCY CALLS ONLY” will appear on the screen and you could only make
emergency call. If you are located in a service area of the network, emergency calls can also be
made without a SIM card.
* Note: In certain areas, 112 (emergency call) is provided by the network operator; if it is
abnormal, please contact the network operator.
IMEI
International Mobile Equipment Identity .Turn off the mobile phone and take out the battery,
and you can find the label printed with this bar code in the rear side. This number is also saved in
the mobile phone. When the phone is turned on, enter “*#06#” to display the number.
IP call
Set the valid IP access number in “Settings/Call settings” first. Enter Contacts and select “IP
call”.
Note: Please consult local network operator that whether IP call should be enabled to call local
numbers.
Shortcut functions
In the standby interface, if you want to activate the simulation keypad to make calls, click the
screen dial to enter desired number and then call the number or perform other operations.