Thomson 2-1018A User Manual

1. Make sure the phone is OFF (not in talk mode).

2. Use the CID/VOL (/\ or \/) button to scroll to any CID record.

3. Press and hold the DEL button until DELETE ALL? shows in the display.

4. Press DEL button to erase all of the current CID records. The display

shows DELETED followed by NO CALLS.

 Press the *EXIT key on the handset to return to the standby mode.

 To reduce the risk of fire or personal injury, use only the

battery 5-2522 that is compatible with this unit.

1. Make sure the telephone is OFF (not in talk

mode) before you replace battery.

2. Remove the battery compartment cover.

3. Disconnect the cord attached to the battery

pack from the jack inside the battery
compartment and remove the battery pack
from the handset.

4. Insert the new battery pack and reconnect

the battery plug.

5. Put the battery compartment cover back on.

6. Place handset in the base or handset

charge cradle to charge. If you don’t charge
the handset battery properly (for 16 hours) when you first set up the
phone and/or when you install a new battery pack, the battery ’s long-
term performance will be compromised.

 If the battery is not properly installed in the handset, or if the battery pack

is not properly connected to the jack inside the battery compartment. "NO
BATTERY" shows in the display when the handset is placed in the charging cradle.