Rosslare Enterprises Ltd PYR-2011G User Manual
PYR-2011G
Installation Instructions
Advanced Wireless PIR
1
0706-0960110+02
1.
2. Introduction
The PYR-2011G Digital Wireless Passive Infrared (PIR) motion
at
ery
gic
d mechanism as well as
ment.
714 , Apr. 25, 1989, as amended
t 68 FR 68545 , Dec. 9, 2003], changes or modifications made to equipment,
which are not expressly approved by Rosslare Enterprises, Ltd., may void the
user's authority to operate the equipment.
user's authority to operate the equipment.
detector is a high-performance, ultra low power intrusion sensor
with advanced design ideal for residential and commercial
applications.
The PYR-2011G's SSFL technology (look down) allows detection
proximity of 50cm from its mounting location.
This unit works with Rosslare’s control panels like HomeLogiX™,
which is wireless, and AuraSys™, which is wired.
For the PYR-2011G to work with AuraSys™, the AuraSys™ panel
must have the XR-16 wireless expansion.
The PIR senses slight motion within a coverage area by detecting
infrared energy with a Pyroelectric sensor.
Serving as an anti-intrusion sensor, the PIR can monitor open space
The PYR-2011G's SSFL technology (look down) allows detection
proximity of 50cm from its mounting location.
This unit works with Rosslare’s control panels like HomeLogiX™,
which is wireless, and AuraSys™, which is wired.
For the PYR-2011G to work with AuraSys™, the AuraSys™ panel
must have the XR-16 wireless expansion.
The PIR senses slight motion within a coverage area by detecting
infrared energy with a Pyroelectric sensor.
Serving as an anti-intrusion sensor, the PIR can monitor open space
within line of sight.
“Walk & Radio” test is easy, as well as friendly and makes it v
“Walk & Radio” test is easy, as well as friendly and makes it v
comfortable for placing and setting. The PYR-2011G uses fuzzy lo
to improve detections and reduce false alarms. It also provides
to improve detections and reduce false alarms. It also provides
digital temperature compensation and self-test capability.
The PYR-2011G is supplied with front and back tampers for high
security.
As a wireless device, it includes a supervise
The PYR-2011G is supplied with front and back tampers for high
security.
As a wireless device, it includes a supervise
a battery-checker and tamper announce
Note 1:
This product must be installed professionally, and has only one
available channel.
Note 2:
Note 2:
Pursuant to FCC §15.21 [ 54 FR 17
a
3. Technical Specifications
teristics
46ft)
14um)
utton setting)
battery.
er tampers
mperature out of
st alarm
ed by last movement (retriggerable)
at 20-minute intervals
riggered)
riggered)
to 140°F)
ensing)
Dimensions:
127mm(
m(2.48 in)
Weight:
0.27 lbs (123
Compliance with
3.1
Optical Charac
Lens Type:
Spherical
Field of view:
115°
Max. Coverage:
14 x 14 m (46 x
No vertical adjustment
3.2
Electrical Characteristics
Battery type:
CR123 (3V/1300mhA)
Current Consumptions:
Standby 15µa, 10ma transmission.
Battery Life (nominal):
3 years (150tr/day)
Detector Type:
Dual PYRO IR element (IR filter 5um÷
Alarm Signaling:
Red LED 2 seconds on (push b
Events Transmission:
Alarm, Tamper, Low
Se
evels fuzzy logic (jumper setting)
nsitivity:
3 l
Speed Detect
: 0.2m/s ÷ 3m/s ∆ t= 1.1°C
(0.66 ft/s ÷ 9.84 ft /s ∆ t= 34° F)
Temperature Compensation
: Digital dual slope (+/- 1°C)
s:
Back and front Cov
Tamper Switche
Supervisory Signals:
Supervisory Signals:
Electronic malfunction, te
range (by flashing LED)
Arming types:
Normal- 2 minutes sleep, followed by la
Dynamic- 2 minutes sleep, follow
Test modes- walk test (no sleep) 1 min
Radio test- 10 transmissions
RF Transmission Characteristics
Dynamic- 2 minutes sleep, follow
Test modes- walk test (no sleep) 1 min
Radio test- 10 transmissions
RF Transmission Characteristics
Frequency:
model H = 868.35 MHz; model G = 433.92 MHz
Range:
200 meters (590.55ft) open field conditions
Supervision transmission:
automatic,
Self check:
t
3 hours from last alarm (re
3.3
Environmental Characteristics
Operating Environment:
Indoor use
Operating Temperature:
-10 to 60°C (14
Operating Humidity:
0 to 95% (non-cond
MHz
RFI Protection:
>20 V/m up to 1000
3.4
Physical Characteristics
5 in)H x 80mm(3.15 in)Wx63m
D (Fits US Gang Box)
g) (without battery)
standard:
CE