Microsoft Corporation NPD-4AW User Manual
[ 14 ]
• ABOUT THE BATTERY
Install the battery
Warning! Use only the BLC-2 battery in this Nokia phone.
If your dealer has already installed the battery, please see “Charge the
battery” on page 15.
battery” on page 15.
1
Remove the back cover of the
phone by pressing and holding
the release button while sliding
the cover upward toward the top
of the phone. Set the back cover
aside.
phone by pressing and holding
the release button while sliding
the cover upward toward the top
of the phone. Set the back cover
aside.
2
Place the battery in the compartment
with the label side facing up and the
metal contacts aligned with the
contact prongs. Snap the battery into
place.
with the label side facing up and the
metal contacts aligned with the
contact prongs. Snap the battery into
place.
3
Replace the cover by sliding it
carefully over the whip antenna
downward until you hear a click.
carefully over the whip antenna
downward until you hear a click.