Code Systems Inc PCMINI-4P User Manual

Starting Your Vehicle
The remote control start function is activated by pressing
the START (key icon) button twice within 3 seconds on
your remote control transmitter.  The system will check
certain pre-conditions before starting, and if all safety
parameters are correct, the engine will start within 5
seconds.   If the vehicle’s starter cranks but does not start
or starts and stalls, the remote engine start system will
power off then attempt to start the vehicle an additional
four times.

Turning Your Vehicle Off
Press and hold the START (key icon) button again to turn
the vehicle off.  If the vehicle is left running the remote start
system will allow the vehicle to run for a total of 15 minutes
and then automatically turn off.

1. Unlock the vehicle doors using the factory keyless

remote.  If the vehicle’s doors are unlocked manually
using the key, the vehicle’s security system will trigger
and the remote start system will turn off.  Inserting
the ignition key into the ignition cylinder and
turning it to the ON or RUN position will disarm the
security system.

2. Enter the vehicle. Do not press the brake pedal.

3. Insert the key into the ignition and turn to the ON positi-

ion. If the ignition key is accidently turned to the start
position, the system’s “starter anti-grind” feature will
prevent the starter from re-cranking.

4. Press the brake pedal. The remote starter disenga-

ges, the vehicle’s power window features are re-ena-
bled and the vehicle will operate normally.