Climax Technology Co Ltd 1818 User Manual
17
) If
“Motion Detection Enable” is ticked but neither of “Region 1” or “Region 2”
is ticked, The IP Camera will not be able to detect any movement.
) Please click the “OK” button for the changes to be effective.
Motion Detection Region
z You can choose the location, size and sensitivity of the motion detection region by
z You can choose the location, size and sensitivity of the motion detection region by
adjusting the parameters shown. The live feed has scales on the horizontal and the
vertical axis for you to refer to.
“Left” determines the horizontal starting point of the motion detection box. It starts
from left of the screen at 0 pixels, towards the right at 640 pixels.
“Top” determines the vertical starting point of the motion detection box. It starts
from top of the screen at 0 pixels, towards the bottom at 360 pixels.
“Width” determines the width of the box. The value of “Left” determines its starting
point.
“Height” determines the height of the box. The value of “Top” determines its
starting point.
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
1
1
>
>
The green box below is region of motion detection according to the set parameter: