Climax Technology Co Ltd LS User Manual
1
ZigBee Light Switch: LS-1-ZBS(R) Series
Introduction
LS-1-ZBS(R) ZigBee Light Switch series include Master Light Switch and Slave Light Switch models.
Depending on the models selected, the light switch can be deployed in single or 3-way installation
according to requirement.
The Light Switch package is designed to be used in new installations or replace existing 3-way light
switch to achieve home automation. After joining ZigBee network, the Light Switch package can be
controlled via ZigBee network to activate remotely turn on/off household lighting.
The Master Light Switch utilizes ZigBee technology for wireless signal transmission. ZigBee is a
wireless communication protocol that is reliable, has low power consumption and has high transmission
efficiency. Based on the IEEE802.15.4 standard, ZigBee allows a large amount of devices to be
included in a network and coordinated for data exchange and signal transmission.
The Master Light Switch can also be bound to a ZigBee Controller to toggle On/Off the connected
lighting.
Models with router function (LS-1A-G-ZBSR and LS-1E-G-ZBSR) also serve as a router in the ZigBee
network. After being included in the ZigBee network, it allows other ZigBee device to join the network
through the Light Switch.
Depending on the models selected, the light switch can be deployed in single or 3-way installation
according to requirement.
The Light Switch package is designed to be used in new installations or replace existing 3-way light
switch to achieve home automation. After joining ZigBee network, the Light Switch package can be
controlled via ZigBee network to activate remotely turn on/off household lighting.
The Master Light Switch utilizes ZigBee technology for wireless signal transmission. ZigBee is a
wireless communication protocol that is reliable, has low power consumption and has high transmission
efficiency. Based on the IEEE802.15.4 standard, ZigBee allows a large amount of devices to be
included in a network and coordinated for data exchange and signal transmission.
The Master Light Switch can also be bound to a ZigBee Controller to toggle On/Off the connected
lighting.
Models with router function (LS-1A-G-ZBSR and LS-1E-G-ZBSR) also serve as a router in the ZigBee
network. After being included in the ZigBee network, it allows other ZigBee device to join the network
through the Light Switch.
Caution
The devices are intended for installation in accordance with the local wiring regulations such as the
National Electric Code in the United States, the Canadian Electrical Code, or CSA C22.1, etc.. If you are
unsure or uncomfortable about installing this device, please consult a qualified electrician in your area.
National Electric Code in the United States, the Canadian Electrical Code, or CSA C22.1, etc.. If you are
unsure or uncomfortable about installing this device, please consult a qualified electrician in your area.
Parts Identification
Master Light Switch: LS-1A/E-G-ZBS(R)
LS-1E-G-ZBS(R) LS-1A-G-ZBS®
1. Function Button
- Pressing the button to toggle on/off the switch.
- Press and hold the button for 10 seconds then release to reset the Light Switch.
- Press and hold the button for 3 seconds then release to bind with a controller
- Press and hold the button for 10 seconds then release to reset the Light Switch.
- Press and hold the button for 3 seconds then release to bind with a controller
2. LED indicator
The LED indicator is used to indicate Light Switch status:
- On:
The Light Switch is turned off.
- Off:
The Light Switch is turned on.
- Flashes twice:
The Light Switch has successfully joined a ZigBee network.
- Flashes five times
The Light Switch has successfully bound with a controller
- Flashes every 20 minutes