Climax Technology Co Ltd PB23 User Manual

                                                                       

The Panic Button is used to activate (or deactivate) a panic alarm. 

z 

The LED indicator will light up briefly when the device is transmitting a signal. 

1.  Press to send a learn code or activate a panic alarm 
2.  Press and hold the button for 8 seconds to send a Cancel Code to the Control Panel. (This   

function is not compatiable with every control panel). 

z 

z 

The Panic Button is powered by one CR123A 3V Lithium battery. 

z 

The Panic Button will transmit any detected low battery status along with any regular status 
signal transmission to the Control Panel for display accordingly.   

z 

When changing battery, after removing the old battery, press the button twice to fully discharge 
before inserting new battery. 

z 

z 

The Panic Button will automatically transmit Supervisory Signals every 30 to 50 minutes. 

z 

If the Control Panel has not received the signal from the Panic Button for a preset period of time, 
the Control Panel will indicate that the Panic Button is out-of-signal range or is out of order. 

z 

z 

Pull out the Battery Insulator to power on the Panic Button 

z 

Put Control Panel into learn mode 

z 

Press the button on the Panic Button to transmit a learn code. 

z 

Refer to your Control Panel’s operation manual to complete the learn-in process. 

z 

z 

Place the Control Panel in the walk test mode. 

z 

Press the Button once. 

z 

The Panel will display the RSSi (Radio Strength Signal) strength.