Climax Technology Co Ltd SR User Manual
1
SR-15ZBS Wireless Indoor Siren
Introduction
SR-15ZBS is a ZigBee wireless Indoor Siren. It is capable of raising alarm upon receiving alarm signal
from the coordinator in the ZigBee network when an alarm is activated. During the alarm, the Indoor
Siren will sound alarm with its built-in siren and also flash the strobe light to attract attention.
The Indoor Siren utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless
communication protocol that is reliable and has low power consumption and high transmission efficiency.
Based on IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network
and coordinated for data exchange and signal transmission
The Indoor Siren Serves as an end device in the ZigBee network. It can be included in the ZigBee
network to receive alarm signal, but cannot permit any other ZigBee device to join the network through
the Indoor Siren.
from the coordinator in the ZigBee network when an alarm is activated. During the alarm, the Indoor
Siren will sound alarm with its built-in siren and also flash the strobe light to attract attention.
The Indoor Siren utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless
communication protocol that is reliable and has low power consumption and high transmission efficiency.
Based on IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network
and coordinated for data exchange and signal transmission
The Indoor Siren Serves as an end device in the ZigBee network. It can be included in the ZigBee
network to receive alarm signal, but cannot permit any other ZigBee device to join the network through
the Indoor Siren.
Parts Identification
1. Mounting Holes X 4
2. Battery Compartment
The Indoor Siren is powered by four 1.5V D-cell alkaline battery.
3. Function Switch Block
The 1-3 DIP Switches can be turned ON/OFF to determine Alarm
Length, please see later section.
The DIP Switches 5-7 are reserved.
Length, please see later section.
The DIP Switches 5-7 are reserved.
4. Function Button
5. Red LED
The LED indicator lights up in the following conditions:
- Continuous quick flashes
The Indoor Siren is alarming.
- Two quick flashes
The Indoor Siren has successfully joined a ZigBee network.
- Flashes once every 20 minutes:
The Indoor Siren has lost connection to its current ZigBee network.
The LED also flashes differently according to Siren status (with
different siren audio), please refer to the following table:
different siren audio), please refer to the following table:
S
S
i
i
r
r
e
e
n
n
A
A
u
u
d
d
i
i
o
o
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
i
i
o
o
n
n
Arm
1 beep
1 flash
Home
1 beep
1 flash
Disarm
2 beeps
2 flashes
Arm(Low Battery)
3 beeps
3 flashes
Home(Low Battery)
3 beeps
3 flashes
Disarm (Low Battery)
4 beeps
4 flashes
Arm (Tamper)
5 beeps
5 flashes
Home (Tamper)
5 beeps
5 flashes
Disarm (Tamper)
6 beeps
6 flashes
6. Tamper Switch
The Tamper switch will be activated when the Indoor Siren is
removed from the mounted surface or has its cover opened.
removed from the mounted surface or has its cover opened.
ON
OFF