Hung Tat Electronic Co Ltd BTKB15TA201 User Manual

Page of 1
07/17/15
ONB15TA201, ONB15TA202
Turning the Keyboard ON/OFF
Pairing the Keyboard to a Bluetooth enabled device
1. Make sure the Bluetooth Keyboard is turned ON.
2. Press the [Connect] button once until the Bluetooth indicator is
    blinking blue. The Bluetooth keyboard is now in a pairing mode.
3. Keep the Keyboard and device (or other Bluetooth device) within
    2 feet of each other during the pairing process.
4. Click Settings icon of your device and turn on the Bluetooth 
    function.
5. The device will search for the keyboard automatically.
5. When the Bluetooth device finds the Keyboard, select
   “Bluetooth Keyboard HT7.1” from the list.
6. Using the Keyboard, type the
    password shown on the tablet 
    (or device) and
 
press enter.
7. After pairing successfully with the tablet, 
Bluetooth
   Keyboard HT7.1 Connected
 is displayed. To disconnect,
   turn the Keyboard OFF.
Charging the keyboard
Step 1:
1. Connect the small end of the included Micro USB Cable to the
    USB charging port on the side of the Keyboard.
2. Connect the large end of the included Micro USB cable to an
    available USB port on your charging station (or other devices
    made for USB charging).
Blinking
1. To turn ON, Slide the switch to the ON position and the
    power indicator will light up. 
2. To turn OFF, Slide the switch to the OFF position. 
Power Indicator Light
NOTE: When turned ON, the Keyboard will automatically
connect to the last tablet (or other Bluetooth device) that it
was paired with. To switch to another device, turn OFF the tablet
or device and restart the pairing process with the new device.
NOTE: Most Bluetooth enabled devices will connect to the
keyboard the on the first attempt. If your device does not connect
to the keypad, see “Pairing the Keyboard with a Bluetooth device”
and repeat the pairing process. Or, depending on your device,
press the “Refresh” or “Search Again” button your device’s
Bluetooth screen.
FCC Part 15:
Warning: Changes or modifications to this unit not expressly 
approved by the party responsible for compliance could void the 
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The Bluetooth word mark and logos are registered trademarks
owned  by Bluetooth SIG, Inc.
iPad is a trademark of Apple Inc., registered in the U.S. and other 
countries.
All trademarks and trade names are those of their respective owners.
Pair Button
Pair Button
Micro
3. The LED Charge Indicator Light on the Keyboard will light up
    RED when charging.
4. The LED Charge Indicator Light on the Keyboard will turn OFF
    when finished charging.
Charge your Keyboard with a PC, MAC, USB adapter or
an AC home USB charger
COMPUTER
AC HOME
USB CHARGER
Charge your Bluetooth Keyboard fully before use.
A message will pop up when pairing is successful.
If pairing fails, repeat the steps above.
BLUETOOTH
®
 KEYBOARD
FOR TABLETS AND SMARTPHONES
In the box
Using the wireless bluetooth keyboard
IOS (Apple) connecting settings
Surface connecting settings
Windows phone connecting settings
Android connecting settings
Legal information
Limited warranty
On your iPad®, tap the 
Step 4:
Toggle Bluetooth to 
On
.
Step 5:
The keyboard will show up under 
Devices
 on the iPad. Select
Bluetooth Keyboard HT7.1
Step 6:
A code will appear on the screen. Enter this code on the keyboard
and click 
Enter
.
Step 2:
Click 
General
.
Step 3:
Click 
Bluetooth
.
icon from the Home Screen.
In the unlikely event that this product is defective, or does not perform properly, you may within One (1) 
Year from your original date of purchase return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
• Provide proof of the date of purchase within the package (Dated bill of sale).
• Prepay all shipping costs to the authorized service center, and remember to insure
   your return.
• Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective 
unit within 
   the package.
• Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if 
examination by the service center determines this product is defective. Products received damaged as a 
result of shipping will require you to file a claim with the carrier.
The shipping address of the authorized service center is:
Southern Telecom, Inc.
        Attention: Customer Service (2nd Floor)
        14-C 53rd Street
        Brooklyn, NY 11232
Should you have any questions or problems concerning this product, please contact our customer service 
department at:
Customer Support:
Phone: 1-877-768-8481 (Toll Free)
Or via the web:
www.southerntelecom.com
Click on “Product Support”
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or 
operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any 
unauthorized person opens, alters or repairs this product. All products being returned to the authorized 
service center for repair must be suitably packaged.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION 
GIVEN BY SOUTHERN TELECOM, INC., IT’S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY 
WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE 
CONSUMER. SOUTHERN TELECOM, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY 
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED 
WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT 
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A 
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH 
ABOVE.
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations 
on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This 
warranty gives you specific legal rights, and you also may have other rights that vary from state to state.  
Distributed by Wal-Mart Stores, Inc. Bentonville, AR 72716, Printed in China
User Manual
User
Manual
PRODUCT GUIDE
Works with IOS, Android, or Windows operation system
Model: ONB15TA201, ONB15TA202
 
 
READ AND KEEP THESE INSTRUCTIONS
1. Keyboard should be turned on.
2. When you want to use the functions keys printed in blue
    on the keyboard, you must activate the operating system
    by pressing [FN] key and choosing the relevant operation
    system of your device (Android: Key [Q] / Windows: Key [W] /
    IOS: Key [E]) together, press [FN] key and the relevant
    key together. (This is only needed to be done one time or
    as you change OS devices.)
3. Once [FN] is associated to the operating system - press
    the [FN] button and function key wanted.
* Some function keys may not be available in select
   operating systems.
Activation OS with Keyboard 
The keyboard is compatible with iOS, Android and Windows OS.
The keyboard will recognize and switch systems automatically 
after connection, but you need to manually activate each device 
OS first by pressing the FN key and the operation keys together 
one time as described below.
Using the Function Keys
Bluetooth Keyboard HT7.1
1. On the start screen, swipe left, and tap     Settings>Bluetooth.
2. Switch Status to On
3. 
Make sure the Wireless Keyboard is on.
4. To pair your phone and the Bluetooth Keyboard, tap the
    Bluetooth Keyboard HT7.1 in the list.
5. A code will appear on the screen. Enter this code on the keyboard
    and click Enter.
1. On the start screen, swipe left, and tap Settings.
   (If you are using a mouse, point to the lower-right corner of the
   screen, move the mouse pointer up, and click Settings.)
2. Tap or click Change PC Settings, tap or click PC and devices,
   and then tap or click Bluetooth.
3. Switch Status to On
4. Make sure the Bluetooth Keyboard is on.
5. To pair your Surface and the Bluetooth Keyboard, tap the
    Bluetooth Keyboard HT7.1 in the list.
6. A code will appear on the screen. Enter this code on the keyboard
    and click Enter.
Bluetooth Keyboard HT7.1
Touch
General
Touch
Bluetooth
Toggle Bluetooth
to On
NOTE: Regarding battery life:
Continues use: up to 25 hours, Stand by: 250 hours.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
-9-
-10-
-11-