ARRIS Group Inc. 224762 User Manual
Administrator’s Handbook
70
LCP Settings:
Authentication: Select Off, PAP and/or CHAP, PAP only, or CHAP only from the pull-down menu. The
settings for por t authentication on the Gateway must match the authentication expected by the remote sys-
tem. The username and passwords are available on the WAN IP Inter faces page.
settings for por t authentication on the Gateway must match the authentication expected by the remote sys-
tem. The username and passwords are available on the WAN IP Inter faces page.
MRU: Specifies the Maximum Receive Unit for the PPP Inter face.
Magic Number: Enables or disables LCP magic number negotiation.
Protocol Compression: Specifies whether you want the Gateway to compress the PPP Protocol field when
it transmits datagrams over the PPP link.
it transmits datagrams over the PPP link.
LCP Echo Requests: Specifies whether you want your Gateway to send LCP echo requests. You should
turn off LCP echoing if you do not want the Gateway to drop a PPP link to a nonresponsive peer.
turn off LCP echoing if you do not want the Gateway to drop a PPP link to a nonresponsive peer.
Max Failures: Specifies the maximum number of Configure-NAK messages the PPP module can send with-
out having sent a Configure-ACK message.
out having sent a Configure-ACK message.
Max Configures: Specifies the maximum number of unacknowledged configuration requests that your
Gateway will send.
Gateway will send.
Max Terminates: Specifies the maximum number of unacknowledged termination requests that your Gate-
way will send before terminating the PPP link.
way will send before terminating the PPP link.
Restart Timer: The number of seconds the Gateway should wait before retransmitting a configuration or
termination request.
termination request.
Click the
Submit
button when you are finished.
Ethernet WAN interface
Click the
Ethernet WAN
link to configure it.