Arris 2247N8 User Manual
Administrator’s Handbook
24
More IP Subnets
When you click the
More IP Subnets
link, the Additional IP Subnets screen appears.
One subnet is preconfigured by default. The Additional IP Subnets screen allows you to configure up to seven
secondary subnets and their DHCP ranges, by entering IP address/subnet mask pairs:
secondary subnets and their DHCP ranges, by entering IP address/subnet mask pairs:
☛
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
◆
To add an IP subnet, enter the Gateway’s IP address on the subnet in the IP Address field and the subnet
mask for the subnet in the Netmask field.
mask for the subnet in the Netmask field.
◆
Enter the DHCP Start Address and End Address of the subnet range in their respective fields.
Ranges cannot overlap and there may be only one range per subnet.
If DHCP Server (see
) is not enabled, the DHCP Start Address and DHCP End
Address fields do not appear.
◆
Click the
Add this IP Subnet
button. Your entries will be added to the IP Subnet List.
To Edit or Remove a configured subnet, click the respective icon in the list item. When you are finished, click the
Apply Changes
button.