Arris 2247N8 User Manual

All management related items are grouped in this section.

set management account administrator username username

Specifies the username for the administrative user – the default is admin.

set management account user username username

Specifies the username for the non-administrative user – the default is user.

Turns cwmp (TR-069 CPE WAN Management Protocol) on or off. TR-069 allows a remote Auto-Config Server 

(ACS) to provision and manage the Motorola Netopia

®

 Gateway. TR-069 protects sensitive data on the Gateway 

by not advertising its presence, and by password protection.

set management cwmp acs-url acs_url:port_number

set management cwmp acs-username acs_username

set management cwmpacs-password acs_password

If TR-069 WAN side management services are enabled, specifies the auto-config server URL and port number. A 
username and password must also be supplied, if TR-069 is enabled.

The auto-config server is specified by URL and port number. The format for the ACS URL is as follows:

http://

some_url.com:port_number

or

http://

123.45.678.910:port_number

On units that support SSL, the format for the ACS URL can also be:

https://

some_url.com:port_number

or

https://

123.45.678.910:port_number

Specifies a timeout period of inactivity for telnet access to the Gateway, after which a user must re-login to the 
Gateway. Default is 15 minutes for telnet.

Specifies the port number for telnet (CLI) communication with the Motorola Netopia® Gateway. Because port 
numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when 
assigning new port numbers to the Motorola Netopia® Gateway telnet configuration interface. A setting of 0 (zero) 
will turn the server off.